Tivar® Clean Stat®
TIVAR® CleanStat® can cut downtime and fines build-up in a variety of applications. It eliminates static build-up problems, meets FDA and USDA guidelines for food contact and exhibits a longer wearing, lower coefficient of friction sliding surface than stainless steel.
TIVAR® CleanStat® can be easily fabricated into components and replacement parts that reduce noise levels in plants and require less frequent cleaning. Its welded design capabilities result in seamless welded components.
Key Features:
- Anti static.
- Suitable for food contact.
- Low coefficient of friction.
- Low moisture absorption.
- Excellent machinability.
Availability:
| Sheet size (mm): |
3050 x 1220. |
| Thickness (mm): |
6 up to 76. |
It is also available in specific tube and rod sizes and custom fabricated parts.
Technical Specification:
Information to be used as a guide only. It corresponds with our current knowledge and indicates possible applications. We cannot guarentee suitability for a specific application. Unless otherwise stated these values represent averages taken from injection moulded samples.
| Property |
Method |
SI Unit |
SI Value |
| Density |
ASTM D-792 |
kg/m(3) |
940 |
| Yield Point |
ASTM D-638 |
MPa |
21.2 |
| Elongation at Yield |
ASTM D-638 |
% |
15 |
| Tensile Break |
ASTM D-638 |
MPa |
35.6 |
| Elongation at Break |
ASTM D-638 |
% |
200 |
| Tensile Modulus |
ASTM D-638 |
MPa |
820 |
| Flexural Modulus |
ASTM D-790 |
MPa |
760 |
| Izod Impact |
ASTM D-4020 |
KJ/m(2) |
41 |
| Tensile Impact |
DIN 53448 |
kJ/m(2) |
1475 |
| Sand Wheel Wear |
ASTM G-65 |
T-1000=100 |
130 |
| Hardness |
ASTM D-2240 |
Type D |
68 |
| Static Friction |
ASTM D-1894 |
Unitless |
0.15 |
| Dynamic Friction |
ASTM D-1894 |
Unitless |
0.12 |
| Coefficient of Thermal Exp. |
ASTM D-696 |
Deg C (-1) |
0.00018 |
| Melt Point |
ASTM D-3417 |
Deg C |
137 - 143 |
| Compressive Modulus |
ASTM D-621 |
MPa |
536 |
| Compressive Deformation |
ASTM D-621 |
% at 454.5 kg |
'6-8 |
| Volume Resistivity |
ASTM D-257 |
Ohm-cm |
10(7) - 10(10) |
| Surface Resistivity |
ASTM D-257 |
Ohm -cm |
10(7) - 10(10) |
| Water Absorption |
ASTM D-570 |
% |
nil |
* Values are averages and not specifications
** ASTM tess methods are under current procedures
BACK