Sound Proofing & Acoustic Solutions
We supply noise control materials in sheet or roll form, covering a wide variety of specifications and applications. A selection of adhesives and SAB Product is available which operate under the most demanding conditions.
Noise control materials are categorised into three different types:-
Sound Absorption
Materials which are mainly porous in order to dissipate the sound energy, are applied to surfaces to eliminate sound reflection and reduce reverberant noise build-up within an enclosed space. They are applied to the internal surfaces of equipment casings and noise enclosures.
Sound Insulation
Materials, which form a sound barrier, are applied to attenuate the level of sound being transmitted through a panel, duct, wall or partition. It is their mass effect which provides the noise reduction and this can in many cases be further increased by the lamination to the material of a spacing layer, often a sound absorption material.
Vibration Damping
Materials are applied to reduce the vibration in panels and machinery casings, where it is the vibrating panel that is producing the noise. By damping the vibration in the panel the noise is reduced at source. These materials also provide a level of sound attenuation, particularly at higher frequencies, and therefore when combined with a sound absorption material, the resulting composite noise control material is most effective for the internal lining of sheet metal enclosures.
Regupol
Regupol is an elastic remanufactured mat made from selected rubber and bound together with polyurethane. It is commonly used as anti vibration pads and for sound deadening applications.