• Phone us
    • Preston
      +44 (0) 1257 248369
    • Manchester
      +44 (0) 1706 363790
    • Yorkshire
      +44 (0) 1706 363790
Manufacture, process and supply plastic, insulation and rubber products to industry

Rubber Roller and Wheel Coating

Rubber Roller and Wheel Coating



 
 

 


Rubber roller and wheel coating is provided by PAR Group using a wide variety of materials.  We can arrange for your rollers to be collected, stripped and recovered. Our grinding facility can provide a finish including diamond, grooved and herringbone. New rollers (including metals) can be manufactured to your exact requirements from drawings or samples. We can also repair your journal ends and bearings if required.

Availability:

Materials: Natural, Neoprene, Nitrile, EPDM, Silicone, Polyurethane, PTFE, PVC and Hypalon.
Shore Hardness (°A): 30 up to 90
Size (maximum): 900mm diameter x 4.2mtrs long overall (3.8mtrs long face to face).
Weight (tonne - maximum): 2.5
Finishes*: Smooth, diamond, grooved and herringbone.

*Other finishes are available upon request.

How to Measure a Roller

To enable us to quote for your roller requirements, we normally require the following information:

  • Finished outside diameter (FOD)
  • Inside diameter (ID)
  • Length
  • Material type including shore hardness, finish and any specific colour requirement

For new rollers, we may also ask for further information from the diagram below.

How to Measure a Roller


Examples of our Rubber Roller and Wheel Coating

Rubber Roller - Before Rubber Roller - After  
Rubber Roller - Before Rubber Roller - After