Roller Shutter Door Seal

Roller Shutter Door Seals
Roller Shutter Door Seals

 

 

Roller shutter door seals are designed to seal the gap between the bottom of a roller shutter door and the floor. This helps to prevent water, leaves and dirt from running under the door and into the building or warehouse. They also help to reduce draught and door vibrations. The roller shutter door seal is manufactured from a weather resistant EPDM rubber and is available in a range of profiles.

Applications: To create a seal between a roller shutter door and the floor.

Standard Roller Shutter Door Seals

The below profiles suit standard roller shutter doors and slide onto the T-bar without the need for mechanical fixings.

PEXTRSDS-D PEXTRSDS-F  
PEXTRSDS-D - Dimensional Drawing PEXTRSDS-F - Dimensional Drawing  
Material:            EPDM                 
Length (mtrs):

5, 10, 20

Material:            EPDM                 
Length (mtrs):

5, 10, 20

 

Alternative Roller Shutter Door Seals

The galvanised metal carrier section requires mechanically fixing to the underside of the T-bar. The PEXTRSDS-30X20 slides into the carrier creating a seal.

PEXTRSDS-30X20 PEXTRSDS-CARRIER  
PEXTRSDS-30X20 - Dimensional Drawing PEXTRSDS-CARRIER - Dimensional Drawing

 

Material:            EPDM                 
Length (mtrs):

Up to 50

Material:            Galv. Steel         
Length (mtrs):

3

 

Note: Fixings are not included with carrier.

Clip on Brush Side Inserts

UPVCBRUSH-3M - Shutter Guide Insert

 

 

 


The UPVC carrier with brush insert is designed to clip onto the shutter guide. It helps to prevent draughts and reduces door vibration.

Availability:

Product Code: UPVCBRUSH-3M
Carrier / Brush Material: UPVC / Nylon

Length (mtrs):

3
Brush Strip Width (mm): 38

Recently Viewed