TICO Z/PA Machinery Mounting Material
TICO Z/PA is a synthetic rubber bonded cork. Although it is generally used for structural applications, TICO Z/PA has now been adapted for the machinery mounting market.
This blend of rubber and cork gives Z/PA a high damping factor and is therefore suitable for a wide variety of applications.
Typical Properties:
| Maximum Load-bearing Capacity: |
1400 KN/m2 (200 psi) |
| Recommended Working Stress: |
Although capable of high stress without breakdown, we recommend maximum compressive strain be limited to 20% in order to ensure a low creep rate. |
| Ultimate Breakdown: |
In excess of 4.5 x the maximum recommended working stress |
| Hardness: |
48° ± 5° IRHD |
| Co-efficient of Friction |
0.69 TICO to concrete, 0.59 TICO to bright mild steel |
| Temperature Range |
-40°C to +100°C |
| Dimensional Stability |
Dimensionally stable under widely varying atmospheric conditions |
| Thermal Conductivity |
0.251 W/m.K |
| Edge Protection |
For severe applications, pad edges are double coated during manufacture with hypalon protective lacquer. |
Availability:
| Maximum Sheet Size (mm): |
1200x915 |
| Thicknesses (mm): |
6, 12.5, 25 |
Cut pieces can also be supplied.
This grade of TICO is fully compatible with the TICO S Washers and Collars.
BACK