Tan Para Shotblast Rubber Sheeting
Tan Para Shotblast Natural Rubber Sheeting
has a higher abrasion resistance than the SBR blended equivalent, being classed as a ‘Para-Natural’ (or pure-gum). Produced from natural latex, this material is designed for uses including chute lining, conveyor skirting, shot-blast cabinet lining, seals, blade scrapers.
Material Profile:
| Colour |
Tan |
| Thickness (mm) |
1.5, 3, 5, 6, 8, 10, 12, 15, 20, 25 |
| Sheet Size* |
1.2mt and 1.4mt wide in 5mt and 10m rolls |
| Finish |
Plate Finish |
*PAR will endeavor to supply cut pieces to your requirement.
Technical Information:
| Density (Specific Gravity) |
1.04 |
| Hardness (degree Shore A) |
40 ± 5° |
| Tensile Strength (Mpa) |
8.0 |
| Elongation at Break |
450% |
| Minimum Temperature |
-20°C |
| Maximum Temperature |
+70°C |
| Abrasion Resistance (mm³) |
150 |
| Tear Resistance (kg/cm) |
15 |
BACK