KLINGER Graphite SLS
Pure exfoliated graphite with a stainless steel foil reinforcement for improved handling characteristics.
The excellent conformability of graphite means that the material is suitable for applications where bolt load is limited or flanges are damaged.
Key Features:
- Excellent resistance to steam
- Resistance to virtually all media
- Outstanding resistance to high and low temperatures
- High compressibility
- Good leakage properties
- Unlimited storage life
- Anti-stick finish on both sides
- Easy to cut
Max temperature: +400ºC.
Max pressure: 140 bar. Availability:
| Sheet size (mtrs): |
1.0 x 1.0 |
| Thickness (mm): |
0.45, 0.8, 1.0, 1.5, 2.0, 3.0 |
Also available in 99.85% pure nuclear grade.
Application Guidelines:
1. Usually satisfactory without reference.
2. Usually satisfactory but suggest you refer to PAR for advice.
3. Caution, definitely refer to PAR and consider another grade of material
*Chemical compatibility must be considered in all cases*
Tests and Certifications:
- BAM Approval for use with oxygen 130 bar / 200ºC
- WRc Approval
- DIN DVGW NG-5124AT0417
- Firesafe according to BS 5146
Technical Information:
| Compressibility ASTM F36A |
* |
40% |
| Recovery ASTM F 36 A |
* |
15% |
| Stress relaxation DIN 52913 |
50MPa, 16h/300ºC |
min 48MPa |
| Klinger cold/hot compression (50MPa) |
Thickness decrease 23ºC
Thickness decrease at 300ºC |
40%
1.5% |
| Gas leakage DIN 3535/6 |
* |
<0.5ml/min |
| Chlorides (soluble) |
* |
<40ppm |
| Fluoride and chloride content |
* |
<200ppm |
| Density |
* |
1.0g/cm³ |
| Max Temperature |
* |
400ºC |
| Max Pressure |
* |
100 bar |
| Purity |
|
min 98% |
We also offer an unbranded graphite gasket material. Click here for material datasheet
BACK