KLINGERsil C4324
Klingersil C4324 is an economic grade based on a mixture of aramid and glass fibres with a nitrile rubber binder.
Key Features:
- Economical
- Good resistance to oils, fuels, hydrocarbons and steam
- Excellent resistance to gas leakage
- Anti stick finish on both sides
- WRAS Approved for use with hot and cold potable water
Max temperature: +350ºC.
Max pressure: 50 bar.
Applications:
Suitable for oils, hydrocarbons, low-pressure steam and water. Excellent resistance to gas leakage. WRAS approved for use with hot and cold potable water.
Availability:
| Sheet size (mtrs): |
2.0 x 1.5*, 4.0 x 1.5, 1.5 x 1.0 |
| Thickness (mm) |
0.4, 0.5, 0.75, 1, 1.5, 2, 3 |
*Donates standard size
Application Guidelines:
1. Usually satisfactory without reference.
2. Usually satisfactory but suggest you refer to PAR for advice.
3. Caution, definitely refer to PAR and consider another grade of material
*Chemical compatibility must be considered in all cases*
Tests and Certifications:
- BS7531 Grade Y
- DIN-DVGW 95.01e052
- SVGW 95-043-07
- KTW C 027/95/st
- WRc Approved
Technical Information:
| Compressibility ASTM F36A |
* |
10% |
| Recovery ASTM F 36 A |
* |
55% |
| Stress relaxation DIN 52913 |
50MPa, 16h/300ºC |
20MPa |
| Stress relaxation BS 7531 |
* |
23MPa |
| Klinger cold/hot compression (50MPa) |
Thickness decrease 23ºC
Thickness decrease 300ºC |
11%
26% |
| Gas leakage DIN 3535/6 |
* |
<0.1ml/min |
| Chlorides (soluble) |
* |
150ppm |
| Thickness increase after fluid immersion ASTM F 146 |
Oil nr.3:5h/ 150ºC
Fuel B:5h/23ºC |
0-10%
0-10% |
| Density |
* |
1.5 g/cm³ |
| Max Temperature |
* |
350ºC |
| Max Pressure |
* |
50 bar |
BACK