Polyethylene PE1000 Sheet - UHMW Metal Detectable
Polyethylene PE1000 sheet - UHMW metal detectable contains additives which are visible to metal detector scanning equipment, so that any plastic contamination in the product can be easily identified. It also offers a higher wear resistance and impact strength compared to standard HDPE and HMWPE plastic sheet. Polyethylene PE1000 sheet - UHMW metal detectable is extremely strong with excellent wear resistance due to a very low coefficient of friction. It also has excellent chemical resistance, very low moisture absorption and is FDA approved.
Temperature: -150°C to +80°C (+120°C short term).
Key Features: Metal detectable, good sliding properties and low abrasion.
Applications: Scrapers, wear strips and machined components. Commonly used within the food and pharmaceutical industry.
Please note: due to variations in metal detector equipment, we would recommend that you carry out your own tests to ensure the correct sensitivity settings are applied to detect the plastic. Please contact us if you require a sample.
Also available: Polyethylene PE1000 Rod - UHMW Metal Detectable.
|Sheet Size* (mm):
||2000 x 1000 (as standard), 3000 x 1200
||6, 10, 12, 15, 20, 25, 30, 40, 50, 80
Although our metal detectable plastic is detectable by the majority of metal detection and x-ray devices we are unable to offer any guarantees and recommend that you test the material with your equipment.
*Sheet size may vary depending on thickness. Please enquire for more information.
Technical Data Sheet
Food Contact Information
Material Safety Data Sheet
Examples of our Polyethylene PE1000 sheet - UHMW Metal Detectable
|Metal Detectable Scraper
||Metal Detectable Chain Guide