Novus™ Gasket Materials
PAR offer the following types of Novus™ gasket materials. if you are unsure as to the correct material to use for your application, please contact PAR for assistance. In order for us to provide you with the best advice please provide the following detail:
Novus™ Gasket Materials can also be converted into
Gaskets, Seals and cut shapes to almost any profile. Please contact our sales office to discuss your requirement.
| Compressed Fibre Jointing |
|
|
|
 |
...awaiting image (colour: yellow) |
|
|
...awaiting image (colour: green) |
...awaiting image (colour: black/red) |
|
|
 |
 |
|
|
 |
...awaiting image (colour: off white) |
Reinforced PTFE Gasket Material |
|
|
 |
 |
|
|
...awaiting image (colour: pink) |
...awaiting image (colour: white) |
Exfoliated Graphite Sheet |
|
|
|
...awaiting image (colour: black) |
...awaiting image (colour: black) |
|
|
...awaiting image (colour: black) |
|
Other options available:
Compressed fibre jointing
Anti-stick
Novus™ materials are available with an anti-stick finish. The coating is specially formulated to be environmentally safe without compromising gasket removal from the flange. Anti-stick finish is available a standard on premium grades Novus™ 10, Novus™ 34, Novus™ 49 (Graftec)
Wire reinforced
Novus™ materials are available with wire reinforcement for applications requiring high compressive strength or where thermal cycling is severe. Carbon steel wire is the standard reinforcement.
Eyelets
Cut gaskets manufactured from Novus™ materials are available with eyelets. The eyelet is fitted on the inner diameter of the gasket and prevents fluid contamination as well as aiding sealability. The standard material for the eyelet is 316L stainless steel but other materials are available on request.
PTFE Envelopes
Cut gaskets fitted with PTFE envelopes offer excellent chemical resistance under moderate service conditions, allowing the use of Novus™ materials in fluids which would normally be unsuitable.
For more information on our PTFE envelope gaskets please click here