GR1GC - Machined Chain Guide Wear Strip

GR1GC - Machined Chain Guide Wear Strip  


The GR1GC machined wear strip profile is manufactured as a guide rail for DIN 8187 Simplex roller chains. The GR1GC profile can be supplied with a carrier profile if required.

Dimensional Drawing:

GR1GC - Dimensional Drawing

Availability:

Available in many different sizes. Please reference the dimensional drawing above with the dimensions in the table below.

Part/Chain No.

A

B

C

D

E

F

G

H

I

Carrier Profile*

Chain Pitch

GR1GC-06B1

20

20

14

17

3.8

13.0

1.1

2.6

17

C-2010

3/8" x 7/32"

GR1GC-0831

20

20

14

17

3.0

12.4

1.4

3.0

17

C-2010

½" x 3/16"

GR1GC-0851

22

20

14

17

4.5

15.1

1.6

3.8

17

C-2010

½" x ¼"

GR1GC-08B1

25

20

16

20

5.7

16.3

1.6

3.8

17

C-2010

½" x 5/16"

GR1GC-0861

25

20

16

20

4.1

16.1

2.1

4.7

17

C-2010

5/8" x ¼"

GR1GC-10B1

28

28

16

20

7.4

19.2

2.1

4.7

24

C-2812

5/8" x 3/8"

GR1GC-12B1

30

28

18

22

9.2

21.8

2.8

5.2

24

C-2812

¾" x 7/16"

GR1GC-16B1

42

38

25

30

15.0

33.8

3.3

6.3

33

C-3818

1" x 17mm

GR1GC-20B1

50

38

30

35

16.8

40.0

4.0

8.2

33

C-3818

1¼" x ¾"

* Carrier profiles are not supplied with the wear strip as standard. Please state upon enquiry if required.