6541 - high temperature clip ducting (1100°C) is manufactured from a three ply special coated fabric that is reinforced with a stainless steel wire helix. The ducting consists of a heat stabilised outer fabric, an encapsulated thermo-textile middle layer and a stainless steel wire inner mesh. This clip ducting is ideal for conveying and extracting exhaust fumes in large capacity engines and for suction during spark formation at extremely high temperatures. It has a maximum operating temperature of +1,100°C and is flame resistant.
For full availability and technical information of our 6541 high temperature clip ducting, please refer to the table below.
Suitable for suction, extraction and conveyance of exhaust gas and turbojet engine fumes. Commonly used in high temperature applications in the automotive, aircraft, mining and steel industries.
- Temperature: -20°C up to +1,100°C.
- Excellent resistance to high temperatures.
- Good flexibility
- Flame resistant.
- Small bend radius.
- Good resistance to abrasion.
- Manufactured according to TRBS 2153 (Zone 1, 21) for non-flammable dusts and gases with low conductivity for dissipation of electrostatic charges when clips are earthed at both ends of the spiral at a gradient of < 30mm.