Silicone Extrusions

Silicone Extrusions

Silicone extrusions are available in various profiles to suit your individual requirements. We are able to manufacture most profiles from samples or drawings. Silicone extrusions are commonly used in high temperature sealing, door sealing, gaskets, dispensers and oven seals.

Temperature: -60°C to +200°C (Higher temperature grades are available upon request).

Applications: High temperature sealing, door seals, gaskets, heat sealing and oven seals.


Our standard profiles are shown below. Please click on the profile you require to view a PDF detailing dimensions of the standard tools available. General purpose grade in 60° hardness is supplied as standard. 

Coil Length (mtrs): 10 (minimum order quantity).*
Colours: White (as standard), any RAL colour available upon request.

*Manufactured to order in a minimum of 10 metres to almost any length.

T-Sections Bubble Seals Door Seals e-Sections H-Sections
Silicone Extrusions T-Sections Silicone Extrusions Bubble Seals Silicone Extrusions Door Seals Silicone Extrusions E-Sections Silicone Extrusions H-Sections
Hollow D-Sections Hollow Strips Inflatable Seals Keyhole Sections L-Sections
Silicone Extrusions Hollow D-Sections Silicone Extrusions Hollow Strips Silicone Inflatable Seals Silicone Extrusions Keyhole Sections Silicone Extrusions L-Sections
Lip Seals Tube Omega Sections P-Sections (Double) P-Sections (Large)
Silicone Extrusions Lip Seals 6703 – Silicone Rubber Tubing Silicone Extrusions Omega Sections Silicone Extrusions P-Sections Double Silicone Extrusions P-Sections Large
P-Sections (Medium) P-Sections (Small) P-Sections (Solid) Solid D-Sections Solid Square Sections
Silicone Extrusions P-Sections Medium Silicone Extrusions P-Sections Small Silicone Extrusions P-Sections Solid Silicone Extrusions Solid D Sections Silicone Extrusions Solid Square Sections
Strip Sections Autoclave Seals Tadpole Sections Trapeze Sections Triangle Seals
Silicone Extrusions Strip Sections Silicone Extrusions Autoclave Seals Silicone Extrusions Tadpole Sections Silicone Extrusions Trapeze Sections Silicone Extrusions Triangle Sections
U Channels (Large) U Channels (Medium) U Channels (Small) U Channels Rounded Window Seals
Silicone Extrusions U Channels Large Silicone Extrusions U Channels Medium Silicone Extrusions U Channels Small Silicone Extrusions U Channels Rounded Silicone Extrusions Window Seals
Cord Sieve Seals U Channel (Clip-on) Tank Seals Arrowheads
Silicone Sieve Seals
Clip on Silicone U Channel
Silicone Extrusions - Tank Seals Silicone Extrusions - Arrowheads

Grades available:

Shore Hardness Temperature Range General Description
Technical Specification
General Purpose 40° - 80° -60 to 200°C Good all round physical properties and available in a range of shore hardnesses. FDA approved. TDS
40° - 70° -60 to 200°C Good tensile and wear strength. Uses include peristaltic pumps. FDA approved. TDS
High Temperature 40° - 70° -60 to 300°C Excellent high temp resistance. Retains properties over long periods when exposed to harsh temps. TDS
Flame Retardant 50° - 75° -60 to 250°C Flame retardant, low smoke and low toxicity grades. BS6853 and UL V0 grades also available if required. TDS
Electrically Conductive 70° Up to 200°C Low resistance <10 Ohms. Commonly used in microwave shielding applications. TDS
Platinum Cured 60° Up to 200°C Very pure silicone content with no by products remaining. Mainly used in medical applications. FDA approved. TDS
Metal Detectable 40° - 80° -60° to 200°C Can be detected by metal detector equipment. Good resistance to oxygen, hot air and ozone. TDS
Steam Resistant 60° Up to 250°C Developed for the manufacture of articles requiring good resistance to steam. FDA approved. TDS

Steam Resistant

Metal Detectable

60° -60° to 250°C Can be detected by metal detector equipment. Good resistance to steam. FDA approved. TDS
Low Temperature 63° Down to -100°C Designed to provide extended service when used in low temperatures. TDS
Specialist Grades - - Oil resistant and high filler content grades are available if required. -

Our metal detectable silicone rubber strip has been tested to fulfil the global migration criteria as specified in FDA 21 CFR 177.2600 through extraction in n-hexane and deionized water.

* Although our metal detectable rubber is detectable by the majority of metal detection and X-ray devices we are unable to offer any guarantees and recommend that you test the material with your equipment.

Technical Specification:

Material Safety Data Sheet

Silicone Extrusions - RoHS Certificate

Printed Silicone Extrusions

Our Silicone extrusions may be printed with our product code and website at approximately 1m intervals along the length for ease of re-order. Click on the image below for an example of a printed profile. If you require your extrusion without branding or with bespoke branding please state this as a headline in writing when making your enquiry.

Printed Silicone Extrusion    
Printed Silicone Extrusion    

Recently Viewed