BS EN 61111 2009 - Electrical Safety Rubber Matting

BS EN 61111 2009 - Electrical Safety Rubber Matting

Cut Pieces Available


PAR offer electrical safety matting certified as meeting BS EN 61111:2009 (also referred to as IEC 61111:2009). This is industry standard for electrical safety matting following the withdrawal of the previous standard BS 921:1976. Under the BS EN 61111:2009, the matting has to undergo a far more comprehensive testing process compared to the BS 921:1976 standard. It is available in 5 different classes (classes 0-4) with a fine fluted pattern on one side and a cloth impression on the reverse. It is also printed with colour coded text on the underside of the mat denoting working voltage and class. Class 0, 2 and 4 grades are available as standard.

Applications: Protection around areas where high voltage equipment is being used.



Roll Length
Roll Width (mtrs)


Maximum Working Voltage Colour Coding Roll
ESM0-1.0M-3 0 10 1.0 3.0 1,000 Volts Red Black
ESM1-1.0M-3* 1 10 1.0 3.0 7,500 Volts White Black
ESM2-1.0M-4 2 10 1.0 4.0 17,000 Volts Yellow Black
ESM3-1.0M-4.5* 3 10 1.0 4.5 26,500 Volts Green Black
ESM4-1.0M-5 4 10 1.0 5.0 36,000 Volts Orange Black

*Manufactured to order and may be subject to minimum order quantities and lead times.

Technical Specification:

Technical Data Sheet - ESM0

Technical Data Sheet - ESM1

Technical Data Sheet - ESM2

Technical Data Sheet - ESM3

Technical Data Sheet - ESM4